Innovative Solutions In NO-BAKE Systems
Key Benefits of RAPID - Vertical Moulding Line
-
Footprint area-saving of up to 60% when compared to typical horizontal fast loop moulding system
-
Approximately 20% faster than a conventional horizontal fast loop with same travel speeds
-
Higher working safety – safest automated loop available
-
Silent and safe operation
-
PLC automatic operation
-
Robust, modern design with easy modular installation
-
Ease of operation
-
Easy integration into existing plants
-
Easily accessible from both sides
-
Dedicated 21” colour touch screen HMI on the operator panel for full control and visualisation
-
Can be used with flask and flaskless moulds
-
All motors inverter driven with smooth start/stop and full diagnostics
To see the rest of the Mould Handling Equipment
PLEASE CLICK
Rapid Moulding Line
RAPID moulding line is a vertical pattern loop system. This brings the advantage of very small foot-print area. Furthermore since the elevators can store 2 bolsters at the same time, the length of the system is reduced by length of one station. The foot print area saving is up to 60% when compared to any horizontal loop system. RAPID vertical loop provides about 20-30 seconds faster cycle times than any conventional loop systems especially with short filling time systems, thanks to its continuous elevators. They operate in one direction only so that the precious return and eject-reload transfer times are saved.
Specs
-
Maximum of 6 bolsters can run in the standard machine.
-
8 and 10 bolster systems are optional.
-
The standard bolster sizes are 1300mm x 1050mm, 1600mm x 1250mm and 2000mm x 1650mm.
-
Up to 4 separate patterns can be fixed on a bolster plate at the same time.
-
The maximum mould heights are 425mm, 500mm and 600mm respectively.
Perfect
Fit
