ALL PRODUCTS

We offer a full range of mould handling equipment that compliment standard moulding plants including rollover strip units, flood coating stations, mould manipulators and mould closing units.

| Rapid | Rotomatik | Fastloop | Compaction Table | Strip Master | Roll to Coat | Easy Close | Manipulator

Thanks to the operation of the system, the cycle is uninterrupted within the loop making the RAPID up to 20% faster than that of our competitors using a traditional loop with the same size continuous sand mixer.

RAPID

The ‘RAPID’ with its vertically arranged loop is unique in its field, especially in respect of its reduced footprint area.

60% Less footprint area when compared to a conventional horizontal moulding loop.
PLC automatic operation.
Safest automated loop

available.
Modern design, with easy modular installation.
Easy integration into existing plants
Access from both sides
Can be used with flask and flaskless moulds
Full control and visualisation with 7” full colour HMI

touchscreen on operator panel
All motors inverter driven with smooth start/stop and

full diagnostics
Fieldbus communication
PILZ safety protection
Optional upgrade to 8 or 10 station
Optional heat above bridge curing stations

Watch the video

rapid

ROTOMATIK

For use with rollover.

AC inverter driven drive from centre
Support rollers under table
Auto load due to rollers angled to the centre
Pneumatic auto eject
Quickly removable maintenance panels
Slow down and stop limits
Modular design
Low maintenance
Interlocked controls for 2 person

authorisation before rotation
Edge roller and bolster plate design
Optional 4, 6 or 8 station design

Watch the video

Roto

The Fast Loop is a productive solution amongst conventional moulding lines.

The production speed can be bettered by a ‘’Close Loop” option where the rollover strip machine (Strip Master) is incorporated inside the loop.

FASTLOOP

It is well suited to applications with non standard sizes.

PLC automatic operation
Transfer car docking onto lines resulting in very smooth bolster

transfer
Laser monitoring of transfer car

travel, absolute control and

perfect positioning
Flawless system control via a

10” full colour HMI touchscreen

on the operator panel
All motors inverter driven with

full diagnostics
Fieldbus communication
PILZ safety protection

Watch the video

Fastloop

COMPACTION TABLE

It is well suited to applications with non standard sizes.

Available in flat top, gravity roller and edge roller design
AC Inverter controlled vibration frequency either fully adjustable or with pre-set speeds
Table raise via air bellows and quick exhaust system
Independent operator controls or incorporated into mixer operator station
Easy clean design
No pits required
Optional quick release rollers

(manual roller only)
Optional AC Inverter driven

powered rollers

cmpaction

STRIP MASTER

Flexible design to suit most foundries

PLC automatic operation
Programmable strip cycle by

operator (every operation fully adjustable such as strip speed, vibration frequency or the unique shock-strip system)
4 zone strip control which doesn’t require operator input
No tall drag chain post due special geometry of machine making the unit completely plug and play
Integrated hydraulics, pneumatics and electrics
Full control via a 7” full colour HMI touchscreen on the operator panel
All motors inverter driven with full diagnostics
All hydraulics on proportional valves
Profibus communication
PILZ safety protection

The ‘STRIPMASTER’ is an improved version of the typically known rollover strip machines, with it’s unrivalled stripping technique that enables stripping of even the most stubborn moulds easily.

ROLL TO COAT

Can be adapted to fit existing plants

Two independent clamps with independent pressure settings
Can coat two moulds at the same time
Flask and flaskless moulds using same clamps with no structural change
Full control and diagnostics with 7” full colour HMI touchscreen on the operator panel
Clamp pressures adjustable on screen, fast changeover between pre-set values
Two adjustable positions; coating and dripping
Belt inverter driven, all hydraulic motions on proportional speed control

RTC

Provided that the mould pattern is properly designed at the first stage of the pattern, then it is possible to close the mould in fully automatic cycle if required.

EASY CLOSE

The ‘EASY-CLOSE’ is a bespoke device that makes it possible to close moulds (cope & drag) that are not properly designed for closing

PLC automatic operation
Precise parallel closing
Balanced manipulator weight so no risk of mould damage during

closing
Robust mechanical design
Full control via a 7” full colour HMI touchscreen on the operator

panel
Smooth floating table
Unbeatably low energy consumption
Automatic centralising both length and width
All motors inverter driven, smooth start and stop
Profibus communication
PILZ safety protection
Adaptable to all existing lines

MANIPULATOR

Flexible design to suit most foundries

This is your Project description. Provide a brief summary to help visitors understand the context and background of your work. Click on "Edit Text" or double click on the text box to start.

MANIP